banner

Contact

Suzhou Fuxinxin Metal Products Co., Ltd.

Contact person: Guan Jianwei

Mobile phone: 13771881206

Website: www.fx86.com

Tel: 0512-62805472

Fax: 0512-62758902

Q: 1499220162


Model GB

Your current location: Home>> Products>> GB

Model GB

  • Model GB
  • 所属分类:GB

  • 点击次数:
  • 发布日期:2019/08/23
  • 规格:
  • 类型:
  • 在线询价
  • 详细介绍

Copper nuts are defined as nuts made of copper (usually lead brass, such as H59, H62). The main copper nuts we come into contact with are hexagonal nuts or other copper nuts matching bolts. Copper nuts are not easy to rust, anti-corrosion, easy to heat conduction and strong electrical conductivity. They are generally used in rust-proof, high temperature, conductive, heat conductive and other use environments, such as taps, valves, electrical switches, etc. Another major use is injection moulding, which is heated and embedded in plastic parts or directly moulded.

As the name implies, copper nuts are defined as nuts made of copper (usually lead brass, such as H59, H62). The main copper nuts we come into contact with are hexagonal nuts or other copper nuts matching bolts.

So why use copper nuts in daily production activities? Because copper nuts are not easy to rust, anti-corrosion, easy to heat conduction and strong electrical conductivity, they are generally used in rust-proof, high temperature, electric conductivity, heat conduction and other use environments, such as taps, valves, electrical switches and so on.

Another main use of copper nuts is injection moulding. After heating, they are embedded in plastic parts or directly moulded. As mentioned earlier, brass has good thermal conductivity. For example, when copper nuts are embedded after heating, on the one hand, copper nuts can quickly heat up and speed up work efficiency, on the other hand, copper nuts after heating can quickly. By conducting heat to plastic parts, the periphery of plastic holes becomes soft, which is conducive to pressing into the holes; then, what is the effect of injection moulding? As we all know, the melting point of PA/NYLOY/PET is above 200 C. The temperature of copper nut increases rapidly when it is melted into plastic parts. After injection moulding, the plastic body cools rapidly and crystallizes and hardens. If the temperature of copper nut is still high, what will be the result? Clever you must have guessed, the result is that the place where the copper nut contacts the plastic parts is loosened or cracked. So copper nuts are used in injection moulding instead of steel nuts.

The shape of copper nuts used in injection moulding is generally circular with various patterns. The hot melting of the mould is usually cylindrical (as shown below). The shape of copper nuts used in hot or cold pressing has a certain taper or inverted spine (as shown above on the right). As for why it is conical or inverted spine, you can guess wisely.


本文网址://www.allbutink.com/en/product/570.html

关键词:Stainlesssteelnut,Through-holenut,Blindholenut

上一篇: GB
下一篇: GB

Recently Viewed:

  • Service
  • Contact
    18270919270
  • Message
  • Message
  • 腾讯QQ
  • Welcome to message
    Please enter your message here。
    Name
    Contact
    Phone
    Landline/Mobile
    Mailbox
    Mailbox
    Address
    Address
    Baidu
    map