Suzhou Fuxinxin Metal Products Co., Ltd.
Contact person: Guan Jianwei
Mobile phone: 13771881206
Website: www.fx86.com
Tel: 0512-62805472
Fax: 0512-62758902
Q: 1499220162
Nuts are parts that are tightly connected with mechanical equipment. They can only be connected through internal threads, nuts of the same specifications and screws. For example, M4-0.7 nuts can only be matched with M4-0.7 nuts (in nuts, the inner diameter of M4 nuts is about 4mm, and the distance between 0.7 fingers and two threads is 0.7mm). For example, a 1/4-20 nut can only be matched with a 1/4-20 screw (1/4 finger nut has an inner diameter of about 0.25 inches, 20 fingers have 20 teeth per inch).Stainless steel nut
Nuts are nuts, which are screwed together with bolts or bolts to tighten parts. All manufacturing machinery must use a component. Nuts have a wide variety of types, we often have national standards, German standards, British standards, American standards, Japanese standards of nuts. Nuts are divided into carbon steel, high strength, stainless steel, plastic steel and other large according to the different materials. Types. According to the product attributes corresponding to different national standard numbers are divided into ordinary, non-standard, (old) national standard, new national standard, American system, British system, German standard. Generally speaking, national standard and German standard are expressed by M (e.g. M8 and M16), while American standard and British standard are expressed by fraction or # (e.g. 8 #, 10 #, 1/4, 3/8) blind hole nuts.